Info

Winch Motor Maintenance

The motor is an important part of the winch, and it is also the most expensive part of the winch. If it is damaged, the cost of maintenance or replacement will be very high. It is important and necessary to take good care of the winch or winch motor.

1.The operating environment shall be kept dry frequently, the surface of the motor shall be kept clean, and the air inlet shall not be obstructed by dust, fiber, etc

2.When the thermal protection of the motor continuously acts, it should be found out whether the fault is caused by the motor or overload or the setting value of the protection device is too low. After the fault is eliminated, it can be put into operation.

3.The motor shall be well lubricated during operation.

4.When disassembling the motor, take out the rotor from the shaft extension end or the non extension end.

5.When replacing the winding, the form, size, turns, wire gauge, etc. of the original winding must be noted down. When these data are lost, it is necessary to ask the manufacturer for them, and change the original design winding at will, which often makes one or several performances of the motor deteriorate, or even cannot be used.

    Name:*

    Email:*

    Phone

    Country

    Message:*

    Share
    Ellsen

    Published by
    Ellsen

    Recent Posts

    HD 10ton Overhead Crane for Sale Nigeria

    As a professional and reputable crane manufacturer and exporter, we have many Nigerian customers who…

    5 days ago

    HD10ton and NLH10ton Overhead Crane in Uzbekistan

    Our customers from Uzbekistan purchased a HD 10ton crane and a NLH 10ton overhead crane.…

    2 weeks ago

    Double Girder Overhead Crane in Thailand

    Double girder overhead crane is widely used in many places including warehouse, workshop, factory, maintenance…

    2 weeks ago

    AQ-HD 3ton Overhead Crane to Bolivia

    AQ-HD type European standard overhead crane is widely used in varous places for materials handling.…

    1 month ago

    3 Sets of Gantry Cranes Installed in Uzbekistan

    One of our customers from Uzbekistan has ordered 3 sets of single girder gantry crane…

    2 months ago

    30 Ton Hydraulic Mooring Winch to Vietnam

    Recently, 6 sets of mooring winches have been completely manufactured in our factory and ready…

    2 months ago