Steel structure workshop refers to a building used for industrial production. Compared with traditional concrete buildings, the steel structure workshop buildings use steel plates or section steel instead of reinforced concrete, which has higher strength and better impact resistance.
Steel Structure Cases
Steel Structure and Overhead Crane for Sale Uzbekistan
Steel Structure for Sale Kazakhstan
Steel Structure for Sale Chile
Steel Structure for Sale in Bangladesh
Components of Steel Structure Workshop Products
The main components of steel workshop include steel column, steel beam, wind-proof column and crane beam.
☆ Steel column: It can be a H-shaped steel column with a constant cross-section or a H-shaped steel column with a variable cross-section.
It is easy to manufacture, safe and reliable, and the main material is Q235B or Q345B.
When the horizontal span of the steel workshop building does not exceed 15m and the column height does not exceed 6m, the steel column should be made of H-shaped steel with equal cross section.
When the span of the factory building is greater than 15m and the column height exceeds 6m, the variable-section steel column should be adopted.
☆ Steel beam: Commonly used welded composite steel beams consist of an I-shaped section consisting of upper and lower flange plates and webs. The main material is Q235B or Q345B.
☆ Wind- resistant column: The wind-resistant column is the structural component of the gable wall. The function of the wind-resistant column is mainly to transmit the wind load of the gable wall. The upper part is transmitted to the entire steel frame structure through the connection with the steel beam, and the lower part is transmitted to the foundation through the connection with the foundation. The main material It is Q235B or Q345B.
☆ Crane beam: The beam used to install the crane track is called the crane beam, which is generally installed on the upper part of the factory building.
Purlin is made of C-shaped steel and Z-shaped steel. The purlin is used to support the roof and wall panels and transfer the load from the roof and wall panels to the main steel frame.
☆ Bracing system
There are roof bracing and wall bracing. The bracing is usually made of steel rods, L angles or square tubes. The bracing system is used to stabilize the steel frame.
☆ Sag rod
The sag rod connects two purlins to adjust and control the stability of two adjacent purlins. Generally, a sag rod is made of a rod with a diameter of 12 or 14 mm.
Wall panels and roof panels are divided into corrugated monochromatic panels and sandwich panels.
Monochrome metal plates are used for steel structure buildings without thermal insulation requirements.
Sandwich panels are mainly used in structural steel buildings with thermal insulation requirements. The core material of the sandwich panel includes foam, glass wool, rock wool and polyurethane.
The other is a corrugated monochromatic board with glass wool rolls, compounded on site.
In order to save energy and indoor daylighting, lighting panels are generally added to the roof, and roof air towers can also be designed at the ridge of the roof to enhance indoor ventilation.
The roles of roof and enclosure structure:
☆ Purlins and girts are necessary frames, combined with metal cladding to form roofs and walls.
☆ Transmit the horizontal force together with the support system to stabilize the entire building.
Advantages of Steel Structure Workshop
Important Factors Affecting Workshop Steel Structure Price
The Span of the Steel Frame
Main Parameters of Single-story Steel Structure Workshop
Length: The total length of the plant needs to be determined. Whether there is a requirement for the column spacing, the column spacing is generally 6m, but it can also be 7.5m, 9m, or 12m;
Span: generally 9-36m, with 3m as a multiple, when the span is large, it is necessary to determine the design of several spans;
Height: indoor floor to the intersection of steel column axis and steel beam axis (clear height of plant), without lifting the crane should be 4.5-9m; when there is a crane, the specific model and lifting height of the crane should be determined;
Whether the roof and walls need to be insulated.
Steel Structure Workshop VS Concrete Structure Building
The cost of a steel workshop is usually lower than that of a concrete structure building. The construction process of prefabricated steel structure workshop is usually not affected by the weather factors. The construction can be carried out normally even if it is raining.
Since all the steel structure components are cut, drilled, welded, and painted in the factory, and the components will be assembled on the construction site. No additional work is required, and almost no additional cost is added.
The prefabricated steel structure workshop is easy to install. The personnel need to erect the steel structure workshop building with only fixing bolts. There is no need for secondary manufacturing on-site, which will greatly reduce labor cost and save construction time.
The steel structure workshop building itself features light weight. The prefabricated steel structure walls and roof are made of light metal building materials, which are much lighter than the brick and concrete wall ceramic tile roof, which can reduce the workshop’s overall weight without damaging the stability of the whole structure.
Why Cooperate with Us?
● We provide prompt customer support service;
● We use premium grade basic materials;
● We adopt innovative manufacturing techniques;
● We do strict quality testing;
● We have bulk production capacity;
● We provide fast and best delivery;
● We provide custom options.
Know the Process of Prefab Steel Workshop Structure
Design is the source of all procedures. Reasonable design not only saves costs, but also makes the construction smoother.
Production is an integral part of the steel structure workshop building according to the design plan. The process includes the following steps:
This process is used for the formal processing of steel components. The cutting quality directly affects the next process. If the cutting is incorrect, the material may become scrap iron. Therefore, it is essential to strengthen the quality control of the process.
It is one of the most prone to quality problems. Therefore, sufficient welding strength must be applied to ensure the durability of the components.
This process has a great impact on the service life of steel structures. A good coating can prevent long-term rust and corrosion of the steel workshop and increase the service life of the steel workshop structure.
The installation process occupies vital position in the quality of the steel structure construction project, and the impact on the entire steel workshop building is even more significant.
☆ We provide both lightweight steel structure and heavy steel structure on request to suit different requirements.
- ➢ Foundation embedded bolt installation
- ➢ Steel column installation (column bracing installation at the same time)
- ➢ Steel beam installation (roof support installation at the same time)
- ➢ Crane beam installation
- ➢ Roof purlin installation
- ➢ Wall purlin installation
- ➢ Roof panel installation
- ➢ Wall panel installation
- ➢ Enclosure and edge installation
- ➢ Completionof the whole installation
☆ Construction of high-rise buildings;
☆ Construction of industrial sheds;
☆ Construction of residential buildings;
☆ Construction of bridges;
☆ Construction of parking garages.
Structural steel fabrication involves cutting, bending, and welding steel to manufacture structures.
Unlike various types of welding that repair or strengthen steel alloys, steel fabricating involves putting steel blocks together to form different structures, which usually have a predetermined size and shape.
In modern buildings, steel structures are used in almost all types of structures, including heavy industrial buildings, high-rise buildings, equipment support systems, infrastructure, bridges, towers, airport terminals, heavy industrial plants, pipe racks, etc.
- Compared with other metals, structural steel is cheaper. This helps reduce the total cost of the entire project.
- Steel structures require low maintenance, as mentioned above, they tend to have a long service life.
- Therefore, compared with other building materials, structural steel is an economically feasible choice.
Choose a Professional and Reputable Steel Structure Manufacturer
As one of the professional and reputable structural steel manufacturers and suppliers, we specialize in design, manufacturing and installation of steel structures. We provide full service from steel structure design to installation.
We provide affordable, durable, and low-maintenance structural steel solutions for workshops, warehouses, factories, maintenance buildings, agricultural building, garage building, and aircraft hangar, etc.
The steel structure workshop products are customized, all dimensions, including length, width, and height, can be freely selected, and the inner column can be eliminated to expand the usable space.
If you have any steel structure workshop for sale needs, please feel free to contact us, and we will offer you professional solution and excellent service.
What Make Us Different?
We believe that quality is the soul of an enterprise. We strictly implement the quality management system.
Our service concept is: Customers’ Satisfaction Is Our Success! Therefore, we always put our customers first!
We promise to serve clients by high-quality products, trustworthy management and one-stop service.
We constantly strive for improvement and being excellent both in technology and quality.
We providing professional service for plan and calculation freely in order to reduce the overal cost for the customers.
We cooperate with clients till the completion of the project, and we provide excellent after-sales service.