Operation Instruction of Single Girder Overhead Crane

1. Before the single girder overhead crane with cab and the driver take over the shift and start up, the hook, steel wire rope, safety device and other components shall be inspected according to the requirements of the spot inspection card, and any abnormality found shall be eliminated.

2. For the single girder overhead crane operated on the ground, each shift shall have a special person to check according to the requirements of the spot check card, and any abnormality found shall be eliminated.

3. The operator must confirm that no one is on the walking platform or track before closing the main power supply. When the power circuit breaker is locked or provided with a notice board, the main power supply can be closed only after the original relevant person removes it.

4. When lifting heavy objects for the first time in each shift (or when the load reaches the maximum weight), the heavy objects shall be put down again after lifting 0.5m from the ground, the brake performance shall be checked, and normal operation shall be carried out after confirming the reliability.

5. In case of any abnormality, stop the machine immediately, cut off the power supply, check the cause and eliminate it in time.

6. After work, raise the hook to a certain height, park the crane at a designated position, and place the controller handle at the “zero” position; pull down the knife gate and cut off the power supply.

7. Carry out daily maintenance.

8. Do good job shift handover.

single girder overhead crane







    Published by

    Recent Posts

    HD 10ton Overhead Crane for Sale Nigeria

    As a professional and reputable crane manufacturer and exporter, we have many Nigerian customers who…

    5 days ago

    HD10ton and NLH10ton Overhead Crane in Uzbekistan

    Our customers from Uzbekistan purchased a HD 10ton crane and a NLH 10ton overhead crane.…

    2 weeks ago

    Double Girder Overhead Crane in Thailand

    Double girder overhead crane is widely used in many places including warehouse, workshop, factory, maintenance…

    2 weeks ago

    AQ-HD 3ton Overhead Crane to Bolivia

    AQ-HD type European standard overhead crane is widely used in varous places for materials handling.…

    1 month ago

    3 Sets of Gantry Cranes Installed in Uzbekistan

    One of our customers from Uzbekistan has ordered 3 sets of single girder gantry crane…

    2 months ago

    30 Ton Hydraulic Mooring Winch to Vietnam

    Recently, 6 sets of mooring winches have been completely manufactured in our factory and ready…

    2 months ago